Common Tasks Mapped to CLI Commands
Table 4: Common Tasks Mapped to CLI Commands
Task | CLI Command | Page |
|
|
|
Add a time slot to a verify | /cx add verify | 46 |
schedule |
|
|
|
|
|
Add a time slot to a selftest | /cx add selftest | 47 |
schedule |
|
|
|
|
|
Enable/disable the rebuild/migrate | /cx set rebuild | 48 |
schedule and set the task rate |
|
|
|
|
|
Enable/disable the verify schedule | /cx set verify | 49 |
and set the task rate |
|
|
|
|
|
Enable/disable the selftest | /cx set selftest | 49 |
schedule |
|
|
|
|
|
View Alarms | /cx show alarms | 40 |
|
|
|
Unit Maintenance Tasks |
|
|
|
|
|
Start a rebuild | /cx/ux start rebuild | 59 |
|
|
|
Start a verify | /cx/ux start verify | 59 |
|
|
|
Pause/resume rebuild | /cx/ux pause rebuild and /cx/ux | 60 |
| resume rebuild |
|
|
|
|
Stop verify | /cx/ux stop verify | 60 |
|
|
|
Enable/disable autoverify | /cx/ux set autoverify | 61 |
|
|
|
Identify all drives that make up a | /cx/ux set identify | 64 |
unit by blinking associated LEDs |
|
|
|
|
|
Port Tasks |
|
|
|
|
|
Locate drive by blinking an LED | /cx/px set identify | 73 |
|
|
|
Check if LED is set to on or off | /cx/px show identify | 70 |
|
|
|
View information for specific drive | /cx/px show | 69 |
|
|
|
View the status of specific drive | /cx/px show status | 70 |
|
|
|
Enclosure Tasks |
|
|
|
|
|
View information about an | /ex show | 79 |
enclosure |
|
|
|
|
|
Locate a particular drive slot in an | /ex/slotx set identify | 82 |
enclosure by blinking an LED |
|
|
|
|
|
www.3ware.com | 17 |
