AMCC 9590SE-4ME manual Cx show all, 3JV3MVTA

Controller Object Commands

/cx show all

This command shows the current setting of all of the following attributes on the specified controller: driver, model, firmware, memory, bios, monitor, serial, pcb, pchip, achip, numports, numunits, numdrives, unitstatus, drivestatus, allunitstatus, exportjbod, ondegrade, spinup, autocarve, and stagger.

Example: (where x represents the actual version number)

//localhost> /c0 show all
/c0 Driver Version = 3.x
/c0 Model = 9550SX-12	112MB
/c0 Memory Installed =
/c0 Firmware Version = FE9X 3.x
/c0 Bios Version = BE9X	3.x
/c0 Monitor Version = BL9X 3.x
/c0 Serial Number = xxxxx
/c0 PCB Version = Rev 0xx
/c0 PCHIP Version = 1.xx
/c0 ACHIP Version = 3.xx
/c0 Number of Ports = 12
/c0 Number of Units = 2
/c0 Number of Drives = 12
/c0 Total Optimal Units	= 2
/c0 NotOptimalUnits = 0
/c0 Total Units = 2
/c0 JBOD Export Policy = off
/c0 Disk Spinup Policy = 7
/c0 Spinup Stagger Time	Policy (sec) = 4
/c0 Cache on Degrade Policy = Follow Unit Policy
/c0 Auto-Carving Policy	= off
/c0 Auto-Carving Size =	2047 GB
/c0 Auto-Rebuild Policy	= enable
Unit UnitType Status	%Cmpl Stripe Size(GB) Cache AVerify IgnECC

--------------------------------------------------------------------------

u0	RAID-5	OK	-	256K		148.99	ON	ON	ON
u1	RAID-5	OK	-	256K		595.961	ON	OFF	ON
Port	Status		Unit	Size		Blocks		Serial
---------------------------------------------------------------
p0	OK		u0	74.53	GB	156301488		3JV3MV1C
p1	OK		u0	74.53	GB	156301488		3JV3MK6B
p2	OK		u0	74.53	GB	156301488		3JV3LW52
p3	OK		u1	74.53	GB	156301488		3JV49S77
p4	OK		u1	74.53	GB	156301488		3JV3MVTA
p5	OK		u1	74.53	GB	156301488		5JV980Z0
p6	OK		u1	74.53	GB	156301488		5JV9820G
p7	OK		u1	111.79 GB		234441648		WD-WMAEL10275
p8	OK		u1	111.79 GB		234441648		WD-WMAEL10274
p9	OK		u1	111.79 GB		234441648		WD-WMAEL10281
p10	OK		u1	111.79 GB		234441648		WD-WMAEL10273
p11	OK		u1	111.79 GB		234441648		WD-WMAEL10274

www.3ware.com 35