American Power Conversion 400kW1MW installation manual Stabilizing the rack

Rack Assembly

Stabilizing the rack

Bolt (4) Rear Cross Braces to rack at designated hole positions. Use (8) M12 x 35 bolts and related hardware: (16) 12mm washers, (8) 12mm lockwashers and (8) M12 nuts. Note that lower bolts on Brace #1 and Brace #2 also connect the Top Side Assemblies to the Bottom Side Assemblies.

Top Side Assembly #2 REAR OF RACK Top Side Assembly #1

Rear Cross Brace #1

(870-3697)Rear Cross Brace #2

(870-3697)

Rear Cross Brace #3	Rear Cross Brace #4
(870-3697)	(870-3698)
Bottom Side Assembly #2	Bottom Side Assembly #1

12mm Washers

(812-0039)M12 x 35 Bolt

(803-1235)

12mm Lockwasher

(812-0038)

M12 Nut

(803-1200)

Battery Rack Assembly and Installation Manual 15