Rack Assembly
Battery Rack Assembly and Installation Manual 19
2. Working left to right (from front of rack), connect the last battery in the first row to the first
battery in the second row using the supplied row-to-row cable.
–Refer to your wiring diagrams for proper cabling and termination points.
–Refer to instructions for “Applying cable boots” on this page, “Connecting to batteries” on
page 20, and “Covering battery connections” on page21.
Applying cable boots. Before wiring batteries, slide both cable ends through a cable boot.
Note
• Prior to connecting batteries, use a voltmeter to check the voltage between
those terminals being connected. Any reading other than zero is unacceptable.
• After connecting the entire shelf, use voltmeter to measure the collective
voltage. Reading should approximate number of batteries on shelf times 12V.