APC 600, 480, 208 manual Route Data Cables to the InfraStruXure Manager Hub or Switch

Route Data Cables to the InfraStruXure Manager Hub (or Switch)

1.Connect a CAT-5 network cable (provided) to the network or 10BaseT ports on your APC InfraStruXure devices. The following devices need to be connected:

Automatic Transfer Switch

Environmental Monitoring Unit

Rack PDU

Symmetra PX UPS

InfraStruXure PDU

2.Run the connected CAT-5 network cables through the data cable troughs to the InfraStruXure Manager Hub (or Switch).

3.Connect each device’s network cable to any available station port in the InfraStruXure Manager Hub (or Switch). Station ports are those with an x after the number (e.g. 2x).

28 InfraStruXure System - Installation and Start-Up