2With the ejector in the “open” position, align the DRAM DIMM in one of the slots as pictured.
IMPORTANT Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.
DRAM DIMM (Your DIMM’s shape and components may vary.)
Connectors | Notches |
| Ribs (inside slot) |
( | Toward vertical plate) |
The DRAM DIMM is designed to fit into the slot only one way. Be sure to align the notches in the DIMM with the small ribs inside the slot.
Ejector (The ejector should be pushed outward and down to be in the open position, as shown.)
DRAM slot (1 of 2)
Vertical plate
3Push down on the DIMM until it snaps into place.
The ejector will automatically close.
4Repeat steps 1–3 if you have another DRAM DIMM to install.
5If you have a High Performance Module to install, proceed to the next section, “Installing a High Performance Module into the Cache Module Slot.” If you are finished installing items, proceed to the section “Closing the Computer.”
146 | Chapter 8 |