System, Equipment, Required, Mounting, Location | AT&T 518-455-710

Specifications

C

System	One PARTNER Plus system processor module required
Equipment	(Release 2 or greater)
Equipment
Required	At least one 200 or 206 module per Attendant is required on
	At least one 200 or 206 module per Attendant is required on
	the system. Maximum four Attendants per PARTNER Plus
	system.
	Attendant must connect to a Release 2 or greater 206 module
	and can plug into any extension jack except 10, 16, 22, or 28
	System telephones at Destination extensions strongly
	recommended (AT&T models MLS-6, MLS-12, MLS-12D,
	MLS-34D, or MLC-6)
Mounting	Within 10 feet of the PARTNER Plus control unit and within 5
Location	feet of a properly grounded power outlet not controlled by a
	switch (connection to same power source as control unit
	strongly recommended)
	Wall mounting optional but recommended. Mounting bracket
	supplied; #10 or smaller screw required (not supplied)
	DO NOT stack multiple Attendants.
Environmental	Tempurature: 32° to +104°F (0° to +40°C)
	Humidity: 0 to 95%, noncondensing
Dimensions	5.5 in W x 10.9 in D x 1.6 in H
	2.2 cm W x 4.3 cm D x 6.3 cm H

Weight	2 lb (4.4 kg)
Electrical	Voltage: 115 VAC ± 10%
	Frequency: 60 Hz
	Power consumption: 7 VA

Battery	Trickle-charged NiCad
	Lithium coin cell
	Recharge time: 18 hours

Specifications C-1

Image 44

AT&T 518-455-710 System, Equipment, Required, Mounting, Location, Environmental, Dimensions, Weight, Electrical, Battery

Contents

Partner Plus Copyright 1991 AT&T All Rights Reserved Issue April WarrantyHow To Comment on This Guide Ordering Information Contents Determining the Call Answering Mode Overview Overview How the Attendant Answers and Transfers Calls An Example Caller Dials a Two-Digit Extension Number Setup Decisions An Introduction Answering an Attendant-Transferred Call Determining the Call Answering Mode Immediate Call Answering Mode Backup Call Answering Mode Determining the Number of Attendants Required Determining Lines the Attendant Will Answer Determining the Route Plan Example Route Plan ABC Supermarket Day G h t Factory Settings for Attendant Announcement Times Type Factory Description Announcement SettingAllocating Time for Announcements Music-on-Hold Source Example Setups Answering Machines Attendant with Routes and Secondary Destinations Attendant with Routes and Secondary Destinations Attendant Attendant SystemProgramming Attendant Used with Answering Machine Attendant System First- and Second-Level Attendants First- and Second-Level Attendants Announcements Attendant a None 2nd-level Attendants Call Answering Mode N o u n c e m e n t Attendant B Installing the Attendant Programming Guidelines Testing for Proper OperationAttendant Programming System Programming for Attendant Operation Important Safety Instructions Additional Safety Instructions for Installation Personnel Hardware Requirements Attendant UnitFront Panel Talking Installing the Attendant Back Panel Attendant Power Phone Mounting Cord Cord Bracket Introduction Using the Programming ChartsProgramming Guidelines Change this See If you want to Setting Commonly Changed Settings To adjust clock for Daylight Saving Time Attendant ProgrammingClock Business Days Recording Announcements Business HoursReallocating Announcement Lengths Routes Answer Delay DayAnswer Delay Night Automatic Tries to Route 0 Day Automatic Tries to Route 0 NightSecurity Code To change the security code Call Answering Mode System Programming for Attendant OperationAttendant Extensions Attendant Line Assignments Night Service Group Transfer Return ExtensionsTransfer Return Rings Ensuring Attendant Extensions Are Not in the Calling Group Testing Basic Operation Testing Secondary Destinations Planning Form Call Answering Mode Attendant in Night Service GroupAnswer Delay Attendant Extension Standard Announcement If Your Announcement Is Different DayNight Transfer System Programming Business Schedule Announcements Power Failure National Service Assistance Center Helpline 1 800 Table B-1 Out-of-Service Codes Out-of-Service CodesNumber Solution Blinks Problem Invalid Extensions and Routes Attendant Disconnects Callers After They Select Routes Caller Hears Initial Announcement More Than Once Dimensions WeightBattery System Power Failure Visual IndicatorsOperation Telephone Line Index Index IN-I IN-2 Index Comcode 106 449 AT&T