Chapter 10. Maintenance
Restore
To restore system configuration settings, do the following:
1.In the Restore panel, click Browse.
2.Navigate to the directory where the backup file is located and select it.
3.When you return to the Backup/Restore page enter the password you set when the backup file was created.
Note: If you did not set a password for the file, leave the field blank.
4.Click Restore.
When the Restore procedure has finished, a message stating that the Matrix KVM Switch will reboot is sent to all users with active sessions. After a short while the switch reboots. When it comes back up the configuration settings that were restored from the backup file are in effect.
99
