ATEN Technology KM0032 user manual KM0532 / KM0932 Rear View, PON Port

Chapter 1. Introduction

KM0532 / KM0932 Rear View

1 2 3 4 5

KM0532

6	7	8
1	2	3	4	5

KM0932

	6	7	8
No.	Component		Description
1	Power Sockets		The power cords from the AC source plug in here. The
			socket on the left is Socket 1; the socket on the right is
			Socket 2.
2	Power Switches		These switches power the KM0532 / KM0932 on and off.
			The switch on the left is Switch 1 and governs Socket 1; the
			switch on the right is Switch 2 and governs Socket 2.
3	PON Port		This connector is provided for a Power over the Net™ (PON)
			unit to plug into. A PON device allows computers attached to
			the switch to be power-managed remotely over the net.
			Contact your dealer for more details.
4	Console Ports		The Cat 5e cables from the console modules plug in here.
5	KVM Ports		The Cat 5e cables that link the KM0532 / KM0932 to the
			KVM Adapter Cables (which connect to the computers – see
			page 18), plug in here.
6	Grounding		The wire used to ground the switch attaches here.
	Terminal
7	CHAIN OUT Port		The CHAIN OUT port is used to connect the daisy chain
			cable to the CHAIN IN port of a daisy chained KM0032
			switch (see page 26).
8	LAN Port		The cable from the LAN, WAN, or Intranet plugs in here.

9