KM0032 / KM0532 / KM0932 User Manual
Single Level Installation
In a single level installation, there are no additional KVM switches cascaded or daisy chained down from the first level KVM switch. To set up a single level installation, refer to the diagram on page 19 (the numbers in the diagrams correspond to the numbered steps) and do the following:
1.Connect the KVM console.
Plug your keyboard, mouse, and monitor into their respective ports on the console module. Each console port is marked with an identifying icon (see page 130).
2.Connect the console module to the KM0532 / KM0932.
Use Cat 5e cable to connect the LINE IN 1 or LINE IN 2 port of the console module to one of the Console (User) ports on the KM0532 / KM0932's rear panel.
(Repeat steps 1 and 2 for all KVM consoles that you wish to connect. Up to 5 (KM0532), or 9 (KM0932) KVM consoles may be connected in this fashion (1 port on the front panel, plus 4 or 8 ports on the rear panel.)
Note: The distance between any console module and any KVM adapter cable must not exceed 300 m (1000').
3.Connect the KVM adapter cable to the computer.
Using a KVM adapter cable that is appropriate for the computer you are installing, plug the adapter cable’s connectors into their respective ports on the computer (see page 131).
4.Connect the KVM adapter cable to the KM0532 / KM0932.
Use Cat 5e cable to connect the KVM adapter cable to any available KVM port on the KM0532 / KM0932.
(Repeat steps 3 and 4 for all computers that you wish to connect. Up to 32 computers may be connected in this fashion.)
5.Plug a cable from the LAN or WAN into the KM0532 or KM0932's LAN port.
6.Connect a PON unit (Optional)
Use Cat. 5e cable to connect the KM0532 or KM0932's PON port to an SA0142 Adapter. Connect the Adapter to the PON IN port of a PN0108 Power Over the Net™ unit (see page 131).
18
