KM0032 / KM0532 / KM0932 User Manual
8.Click Upgrade to start the upgrade procedure. As the upgrade proceeds, progress information is shown on the screen. Once the upgrade completes successfully, the switch resets itself.
9.Log in again, and check the firmware version to be sure it is the new one.
Firmware Upgrade Recovery
Should the switch’s firmware upgrade procedure fail, and the switch becomes unusable, the following firmware upgrade recovery procedure will resolve the problem:
1.Power off the switch.
2.Press and hold the Reset Switch in (see Reset Switch, page 7 for details).
3.While holding the Reset Switch in, power the switch back on.
This causes the switch to use the original factory installed main firmware version. Once the switch is operational, you can try upgrading the main firmware again.
Adapter Cable Firmware Upgrade Recovery
Should the adapter firmware upgrade procedure fail for one of the KVM Adapter Cables and the adapter becomes unusable, the following adapter firmware upgrade recovery procedure will resolve the problem:
1.Unplug the Adapter from the computer it is connected to.
2.Slide its Firmware Upgrade Recovery Switch (located next to the Cat 5e connector) to the RECOVER position.
3.Plug the Adapter back into the computer.
4.Repeat the Adapter upgrade procedure.
5.After the Adapter has been successfully upgraded, unplug the Adapter from the computer it is connected to; slide the Firmware Upgrade Recovery Switch back to the NORMAL position; and plug the Adapter back in.
102
