ATEN Technology KM0532, KM0932 user manual KM0032 Rear View

KM0032 / KM0532 / KM0932 User Manual

KM0032 Rear View

1 2 3 4

5 6 7

No.	Component	Description
1	Power Sockets	The power cords from the AC source plug in here. The
		socket on the left is Socket 1; the socket on the right is
		Socket 2.
2	Power Switches	These switches power the KM0032 on and off. The switch on
		the left is Switch 1 and governs Socket 1; the switch on the
		right is Switch 2 and governs Socket 2.
3	PON Port	This connector is provided for a Power over the Net™ (PON)
		unit to plug into. A PON device allows computers attached to
		the switch to be power-managed remotely over the net.
		Contact your dealer for more details.
4	KVM Ports	The Cat 5e cables that link the KM0032 to the KVM Adapter
		Cables (which connect to the computers – see page 18),
		plug in here.
5	Daisy Chain Ports	When daisy chaining KM0032 switches (see page 26), the
		daisy chain cables plug in here. The upper port is the Chain
		In port; the lower one is the Chain Out port.
6	Firmware	The firmware upgrade cable that transfers the firmware
	Upgrade Port	upgrade data from the administrator's computer to the
		KM0032, plugs into this RJ-11 connector.
7	Grounding	The wire used to ground the KM0032 attaches here.
	Terminal

10