ATEN Technology KM0532, KM0032, KM0932 Changing the Preference Settings, Setting Function

KM0032 / KM0532 / KM0932 User Manual

Changing the Preference Settings

Make your settings changes according to the information given in the following table:

Setting	Function
Language	Selects the language that the interface displays in. Drop down the list of
	available languages to choose the one you want.
Toolbar	Selects which Hotkey controls the Toolbar: [Scroll Lock] [Scroll Lock], or
Hotkey	[Ctrl] [Ctrl].
	Since the Ctrl key combination may conflict with programs running on the
	local client computers or servers, the default is the Scroll Lock
	combination.
ID Display	Selects how the Port ID is displayed: the Port Number plus the Port
	Name (Port Number + Port Name); the Port Number alone (Port
	Number); or the Port Name alone (port name).
	The default is Port Number + Port Name.
ID Duration	Determines how long a Port ID displays on the monitor after a port
	change has taken place. You can choose an amount from 0–255
	seconds, or check Always On.
	Note: A setting of 0 (zero) has the same effect as checking Always On.
	The default is 3 Seconds.
Scan	Determines how long the focus dwells on each port as it cycles through
Duration	the selected ports in Scan Mode (see Auto Scanning, page 106). Key in
	a value from 1–240 seconds.
	The default is 5 seconds.
Screen	If there is no input from the console for the amount of time set with this
Blanker	function, the screen is blanked. Key in a value from 0–30 minutes, or
	check Disabled to disable this function. If you check Disabled, the screen
	is never blanked.
	Note: A setting of 0 (zero) has the same effect as checking Disabled.
	The default is Disabled.
Logout	If there is no user input for the amount of time set with this function, the
Timeout	user is automatically logged out. A login is necessary before the Matrix
	KVM Switch can be accessed again. Key in a value from 0–180 minutes,
	or check Disabled to disable this function. If you check Disabled, users
	are never automatically logged out, no matter how much time passes.
	Note: A setting of 0 (zero) has the same effect as checking Disabled.
	The default is Disabled.
Broadcast	When Broadcast is Enabled (see page 87), if there is no user input for
Timeout	the amount of time set here, the Broadcast function is automatically
	ended. Key in a value from 0–240 seconds, or check Disabled to disable
	this function. If you check Disabled, the broadcast function is never
	automatically ended, no matter how much idle time passes.
	Note: A setting of 0 (zero) has the same effect as checking Disabled.
	The default is Disabled.

84