Using Your ATI Multimedia Center 91
Video problems ...
Video is unstable or only black and white
Check that you are using the correct broadcast standard format:
•See Broadcast Standard in TV video settings on page 17. For proper operation, you must specify your country in the TV Channels Initialization Wizard (see page 13).
•Check the quality of your incoming TV signal on another receiver; bad reception may be the cause.
There is no video or audio
•Ensure that your cable or antenna is connected.
•Ensure that the video connector is set to the correct source (see Connector in TV video settings on page 17).
•Check that the audio and video connectors are securely plugged into the correct jacks.
•Check that your video card is securely seated in its slot. Please refer to the user guide for the card location.
