Axis Communications user manual Axis A1001 Network Door Controller

AXIS A1001 Network Door Controller & AXIS Entry Manager

Technical Specifications

Technical Specifications

AXIS A1001 Network Door Controller

Function/group	Item	Specifications
	Models	AXIS A1001 Network Door Controller
Door controller	Readers	Up to 2 readers per controller (Wiegand, RS485 (OSDP) with supported card formats
	Doors	1–2 doors per controller1
	Credentials	Up to 15 000 with third-party access management software depending on server
		capacity
	Event history	30 000 First in First out (FIFO) per controller
	Access schedules	Unlimited or third-party software dependent
Digital I/O	I/O interface	Reader I/0: DC output: 2x 12 V DC output max 300 mA; 2x 4 configurable
		inputs/outputs, (digital input: 0 to max 40 V DC, digital output: 0 to max 40 V DC,
		open drain, max 100 mA)
		Reader data: RS485 full duplex, RS485 half duplex, Wiegand
		Auxiliary: 1x 3.3 V DC output, max 100 mA, 2x configurable inputs/output (digital
		input: 0 to max 40 V DC, digital output: 0 to max 40 V DC, open drain, max 100 mA)
		Door connectors: 2x 2 input for door monitors and REX (digital input: 0 to
		max 40 V DC)
	I/O functionality	Preconfigured for readers and door monitors, Input trigger, Output toggle/pulse
Network	Security	Password protection, IP address filtering, HTTPS2 encryption, IEEE 802.1X network
		access control, digest authentication, user access log
	Supported protocols	IPv4, HTTP, HTTPS2, TLS2, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP,
		SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP,
		DHCP, ARP, SOCKS
System	Application	Open API for software integration, including VAPIX®; specifications available at
Integration	Programming Interface	www.axis.com
		ONVIF Profile C, specifications available at www.onvif.org
		Support for access control as a service with One-Click Connection
Events & Alarms	Tamper detection	Removal of unit cover/tamper front
		Removal of unit from wall/tamper back
		Reader tamper
	Event log	Configurable by time and topic, Alarm acknowledgement
	Event actions	Notification via email, HTTP and TCP, External output port, Status LED
	Event triggers	Access Point: Access point enabled
		Configuration: Access point changed, Access point removed, Area changed, Area
		removed, Door changed, Door removed
		Door: Door alarm, Door double-lock monitor, Door lock monitor, Door mode, Door
		monitor, Door warning
		Event Logger: Alarm
		Hardware: Casing open, Network, peer connection
		Input Signal Digital input port, Manual trigger, Virtual inputs
		Schedule: Interval, Pulse
		System: System ready
		Time: Recurrence, Use schedule

54