8. Tools Menu
2. Press →to select the Tools item
3. Press ↓to Pull down the Tools menu
4. Use ↑or ↓to select PiP Adjust (image 8-16)
5. Press ENTER
The menu dissapears.
Thefocus moves to thenext window w hen pressing ENTER (clockwise rotation)
If you press BACK or if you wait 5 seconds the menu is displayed.
Image8-16
When using the PiP adjust key on the RCU the corresponding source box is displayed in the bottom right
corner.

How to adjust a window in the layout ?

1. Use the PiP Adjust key or function in the m enu to choose the window to be adjusted
2. Press ENTER
A wizard bar is displayedin the bottom of the screen
Follow the procedure.
8.7 Diagnostics
What can be done ?
TheI 2C bus allows the diagnostic of different hardware components

How to display the diagnostics menu ?

1. Press MENU to activate the Toolbar
2. Press →to select the Tools item
3. Press ↓to Pull down the Tools menu
4. Use ↑or ↓to select Diagnostics
5. Press →to pull down the menu
6. Press ENTER to select I 2C (image 8-17)
A textbox is displayed (image 8-18, image 8-19)
82 R5976491 IQ PRO G500 01/02/2007