of the connected AP. WDS takes advantages of cost saving and flexibility which no extra wireless client device is required to bridge between two access points and extending an existing wired or wireless infrastructure network to create a larger network.
In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must be the same for both access points.
WDS Service: The default setting is Disable. Check Enable radio button to activate this function.
1.Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important that your peer’s AP must include your MAC address in order to acknowledge and communicate with each other.
2.Peer WDS MAC Address: It is the second associated AP’s MAC Address.
3.Peer WDS MAC Address: It is the third associated AP’s MAC Address.
4.Peer WDS MAC Address: It is the fourth associated AP’s MAC Address.
Note: For MAC Address, Semicolon ( : ) or Dash
4.4.1.2Wireless Security
You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled.
WPA Pre-Shared Key
WPA Algorithms: TKIP (Temporal Key Integrity Protocol) / AES(Advanced
86
