Billion Electric Company BiGuard 50G user manual IPSec Wizard

4.4.6.1IPSec

IPSec is a set of protocols that enable Virtual Private Networks (VPN).

You can find two items under the IPSec section: IPSec Wizard and IPSec Policy.

4.4.6.1.1IPSec Wizard

Connection Name: A user-defined name for the connection.

Interface: Select the interface the IPSec tunnel will apply to. WAN1: Select interface WAN1

WAN2: Select interface WAN2

Auto: The device will automatically apply the tunnel to WAN1 or WAN2 depending on which WAN interface is active when the IPSec tunnel is being established. Note. Auto only applies to Fail Over mode. For Load Balance mode, please do not select "Auto". In Load Balance mode, Auto will be forced to WAN1 interface if Auto is selected.

Pre-shared Key: This is for the Internet Key Exchange (IKE) protocol. IKE is used to establish a shared security policy and authenticated keys for services (such as IPSec) that require a key. Before any IPSec traffic can be passed, each router must be able to verify the identity of its peer. This can be done by manually entering the

122