NOTE: When enabling remote access, please make sure to change the default administration password for security reason.
Action: Select Enable or Disable remote access function.
HTTPS Port: Please input the remote access HTTPS port you would like to use.(default is 443)
Click Apply to apply your settings.
Click Create to add a Remote Access Table to specify the allowed remote access addresses.
Allow Remote Access By:
Everyone: Please check if you allow any IP addresses for the remote user to access.
Only the PC: Please specify the IP Address that is allowed to access.
PC from the subnet: Please specify the subnet that is allowed to access.
4.4.4.3Firmware Upgrade
109
