ISP setting in WAN site:
Obtain an IP Address automatically (DHCP Client)
DHCP server:
DHCP server is enabled.
Start IP Address: 192.168.1.100
End IP Address: 192.168.1.199
3.5.1User Name and Password
The default user name and password are "admin" and "admin" respectively.
If you ever forget your user name and/or password, you can restore your BiGuard 50G to its factory settings by holding the Reset button on the back of your router until the Status LED begins to blink. Please note that doing this will also erase any previous router settings that you have made. The Status LED will remain solid as the device boots. Once the boot sequence is complete, the LED will shut off, indicating that BiGuard 50G is ready.
3.5.2LAN and WAN Port Addresses
The default values for LAN and WAN ports are shown below:
LAN Port
IP address | 192.168.1.254 | |
|
| |
Subnet | 255.255.255.0 | |
Mask |
|
|
|
|
|
DHCP server | Enabled |
|
function |
|
|
|
|
|
IP | 100 IP | addresses |
addresses | continuing | from |
for | 192.168.1.100 | |
distribution | through |
|
to PCs | 192.168.1.199 | |
|
|
|
WAN Port
The DHCP Client is enabled to automatically get the WAN port configuration from the ISP.
61
