The Configured Virtual Ports box lists all the ports available to be configured with proper Ethernet addressing information. Each port represents a physical device on the Ethernet network. The ports are named NetCOM1 through NetCOM256; these names cannot be altered.
To change the characteristics of a previously configured port, select it and click Modify. Select an existing port and click Delete to delete the configuration information for a virtual port.
Clicking on Add displays the Add Virtual Port dialog box, shown below. (Clicking on Modify brings up the same dialog box with the selected port’s characteristics displayed for your review and/or modification. Also, the Virtual Port selection pull- down list is disabled in the Modify command.)
18 • Chapter Three - Getting Started | DDE Server User’s Guide |
