2Use or to select the reduction ratio you
3Press Menu/Set when the screen displays your selection.
4Press Stop/Exit.
If you receive faxes that are split on two pages, change the reduction to AUTO
■When you use Auto Reduction to reduce incoming documents to fit on one page
of recording paper, you can do so only as long as the original document is not longer than 35 cm. If the original is longer than 35 cm, the data will not be reduced and will carry over to print on a second page.
■When you use Auto Reduction and you receive an incoming document that is smaller than your recording paper, no reduction will take place, and you will get the same size recorded as the original.
Reception into Memory
As soon as the paper cassette becomes empty or ink ribbon runs out during fax reception, the screen will display CHECK PAPER; please put some paper in the paper tray.
If the MEMORY RECEPTION switch is ON at this time…
The current fax reception will continue, with the remaining page(s) being stored in memory, subject to available memory. Subsequent incoming faxes will also be stored into memory until the memory is full, following which no further incoming fax calls will be automatically answered; all data will be printed as soon as fresh paper is put in the paper cassette.
If the MEMORY RECEPTION switch is OFF at this time…
The current fax reception will continue, with the remaining page(s) being stored in memory, subject to available memory. Subsequent incoming fax calls will not be automatically answered until fresh paper is put in the paper cassette. The last fax received will be printed as soon as fresh paper is put in the cassette.
1 Press Menu/Set, 2, 6. The screen displays | 6.MEM.RECEIVE |
|
2Use or to select ON or OFF, and press Menu/Set when the screen displays your selection.
3Press Stop/Exit.
Printing a Fax from Memory (Only for
If you have fax storage ON for remote retrieval, you can still print a fax from the machine’s memory when you are at your machine. (See Setting Fax Storage, page 60.)
1Press Menu/Set, 8, 4.
2Press Fax Start.
3Press Stop/Exit.
USE BASIC
Receiving a Fax 27