12 Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. In order to operate within the limits for compliance with Telecom's Specifications, the associated equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is no less than 5 seconds between the end of one call attempt and the beginning of another.
13 Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. In order to operate within the limits for compliance with Telecom’s Specifications, the associated equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing.
14 This equipment should not be used under any circumstances which may constitute a nuisance to other Telecom customers.
15 Not all telephones will respond to incoming ringing when connected to the extension socket.
16This equipment may not provide for the effective
17The answer delay setting of this equipment shall not be set to less than two rings to answer as this will destroy Caller ID information.
18All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is to be aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used and what it disclosed to any other party.
19The Caller ID Information is presented in the form: Area Code + Directory number
When dialling back, always insert a zero in front of the area code for a toll call and omit the area code for a local call, If a zero is inserted in front of the area code for a local call, the call will still proceed correctly but if the line has
20Do not place this product on an unstable surface.
21Slots and openings in the case and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar soft surface. This product should never be placed near or over a radiator or heater. This product should not be placed in a
22This product should be operated from the type of power source indicated on the label. If you are not sure of the type of power available, consult with your dealer or local power company.
23This product is equipped with a
24Do not allow anything to rest on the power cord. Do not locate this product where people can walk on the cord.
25Do not place anything in front of the machine that will block received faxes. Do not place anything in the path of received faxes.
26Do not touch a document during printing.
| INFORMATION | IMPORTANT |
| ||
|
|
|
Important Safety Information 93