Retrieving the Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if you have any fax messages.
1Dial your fax machine’s number.
2When you hear the beep, immediately enter your Remote Access Code (3 digits followed by 
).
3When you hear two short beeps, use the dial pad to press 9 6 1.
4Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want the Memory Status List forwarded, and then press # #.
You cannot use 
and # as dial numbers. However, if you want to store a pause, press #.
5After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine and sends the Memory Status List. The remote fax machine prints the List.
Retrieving Fax Messages
1Dial your fax machine’s number.
2When you hear the beep, immediately enter your Remote Access Code (3 digits followed by 
).
3As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want your fax messages forwarded, and then press # #.
You cannot use 
and # as dial numbers. However, if you want to store a pause, press #.
5After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine and sends the stored documents. The remote fax machine prints your fax messages.
USE ADVANCED
Message Centre (Only for