Insert the document face down in the Automatic Document Feeder.

2 Sending a Fax

Scanning Adjustment

Contrast

If your document is very light or very dark, you might want to set the contrast accordingly. Use LIGHT to send a light document. Use DARK to send a dark document. After sending the document the contrast setting is set to AUTO (suitable for most documents) automatically.

1

2Press Menu/Set, 3, 3.

3Use or to select AUTO, LIGHT, or DARK.

4When the screen displays your selection, press Menu/Set. The screen displays:

5Press 2 if you have finished choosing settings, and go to Step 6—OR––Press 1 if you want to select additional settings. The display returns to SETUP SEND menu.

6Enter a fax number and press Fax Start to send a fax.

Resolution

ACCEPTED NEXT 1.YES≈2.NO

When you have a document in the feeder, you can use the Resolution key. Press Resolution continuously until you see your selection on the screen. If you want to set a different resolution for each page, see Multiple Resolution Transmission, page 43.

STANDARD: suitable for most typed documents.

FINE: good for small print; transmits a little slower than standard resolution.

S. FINE: good for small print or artwork; transmits slower than fine resolution.

PHOTO: use when document has varying shades of grey; slow transmission time.

Sending Operation

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1Insert the document face down in the Automatic Document Feeder.

2Pick up the handset and listen for a dial tone—OR—Press Speaker Phone (for FAX-737MC only).

3Enter the fax number you want to call. (See Dialling a Number, page 21.)

4When you hear the fax tone, press Fax Start. If you are using the handset, hang up.

20Chapter 2