Simple steps to prepare and use the machine.
Follow these simple steps below to prepare and use the machine.
However, before you perform these steps, refer to the Important Information (page 91), and Advice for Preparation and Simple Use Guide (page 4).
If you need further information, refer to BASIC USE or ADVANCED USE.
PREPARATION USE SIMPLE AND
1 Make sure you have the items shown below
Check that you have the following items:
Adapter
(Only for Australia)
Telephone
Line Cord
Telephone
Handset
Handset
Curled Cord
Paper
Wire Extension
Paper Tray
One Touch
Name Label
User’s Guide
Quick Setup Guide
* The printing cartridge is already installed in the machine.
Keep the packing materials for possible future transport. Failure to pack the machine properly may damage the machine and such damages will not be covered under warranty.
2 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
3 Setting the Dialling Mode (Tone/Pulse) (Not available in New Zealand)
1Press Menu/Set, 1, 1. The screen prompts you to select TONE or PULSE.
2Use 
or 
to select the dialling mode, and press Menu/Set when the screen displays the dialling mode you want.
3Press Stop/Exit.
4 Using the telephone
1Pick up the handset.
2When you hear a dial tone, dial the number, using the dial pad.
3To hang up, replace the handset on its cradle.
Preparation and Simple Use Guide 1