Setting the Toll Saver
When you set the Toll Saver feature, the machine answers after 5 (4 in Australia and New Zealand) rings if you don’t have messages, and after 3 (2 in Australia and New Zealand) rings if you do have messages. This way, when you call the machine, if it rings 4 (3 in Australia and New Zealand) times, you know you have no messages, and can hang up, avoiding any toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off for the machine to operate using your Ring Delay setting. (See Setting the Ring Delay, page 24.)
1Press Menu/Set, 2, 1.
2Press 
or 
to select TOLL SAVER, and press Menu/Set.
3Press 
or 
to select ON (or OFF), and press Menu/Set.
4Press Stop/Exit.
ICM Recording Monitor
This feature lets you turn OFF (or ON) the speaker volume for voice messages. When you turn the monitor OFF, you will not hear messages as they come in.
1Press Menu/Set, 8, 5.
2Press 
or 
to select OFF (or ON), and press Menu/Set.
3Press Stop/Exit.
Recording a Conversation
You can record a telephone conversation by pressing Play/Record during the conversation. Your recording can be as long as the Incoming Message Maximum Time. The other party will hear a beep every 15 seconds while recording. You cannot record a conversation using the Speakerphone.
Fax Forwarding/PagingWhen Paging is set to ON, your machine dials the pager number you have programmed and, when connected, plays the Paging OGM message you have recorded for 60 seconds. This activates your pager and let you know you have a fax or voice message in the Message Centre memory.
When Fax Forwarding is set to ON, your machine dials the fax machine phone number you’ve programmed, and forwards any faxes you’ve received.
You cannot use Paging and Fax Forwarding at the same time.
70Chapter 12