Using Memory Security
You must use a password to switch Memory Security ON and OFF.
Setting Up Memory Security for the First Time
1 | Press Menu/Set, 0, 1. | NEW≈PASSWD: |
2 |
| |
Enter a | ENTER≈≈≈SET | |
|
|
3Press Menu/Set.
| The screen prompts you to | VERIFY: | ||
4 |
|
|
| |
ENTER≈≈≈SET | ||||
5 |
|
|
| |
Press | or | to choose SET SECURITY. |
| |
6 | Press Menu/Set. |
|
| |
| The screen prompts you to enter the password. | PASSWORD: | ||
7 |
|
|
| |
Enter a |
|
ENTER≈≈≈SET
This is the same as the security password of the machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by SECURE MODE - Memory Security is now switched ON.
If the password you enter at Step 7 is incorrect, the screen would display WRONG PASSWORD. After 2 seconds the display will then return to Miscellaneous Menu. You must then switch ON Memory Security again. (See Switching Memory Security ON, page 42.)
USE ADVANCED
Changing the Memory Security Password
1Press Menu/Set, 0, 1.
2Press or to choose SET PASSWORD.
3Press Menu/Set.
The screen prompts you to enter the old password.
4Enter the current password.
5Press Menu/Set.
6Enter a
7Press Menu/Set.
The screen prompts you to
8Enter the new password again and press Menu/Set.
9Press Stop/Exit.
OLD≈PASSWD: ENTER≈≈≈SET
NEW≈PASSWD: ENTER≈≈≈SET
VERIFY:
ENTER≈≈≈SET
Advanced Sending 41