Setting the Station ID

You can store your name, fax number and telephone number in this setting. The name and fax number will be printed on the fax cover pages and all fax pages that you send. (The telephone number will be printed only on your cover pages and on the call back messages.) (See Electronic Cover Page (Only for FAX-727/737MC), page 35 and Call Reservation (Only for FAX-727/737MC), page 38.) It is important that you enter the fax and telephone numbers in the internationally standardised format, i.e. in accordance with the following strict sequence:

-The “+” (plus) character (by pressing key)

-Your Country Code

-Your local area code minus any leading “0”

-A space

-Your number on the local exchange, using spaces to aid readability as appropriate.

1Press Menu/Set, 1, 3.

2Enter your fax number (up to 20 digits) and press Menu/Set.

3Enter your telephone number (up to 20 digits) and press Menu/Set.

4Enter your name (up to 20 characters) using the dial pad and the chart. To enter a space press

twice.

5Press Menu/Set.

6Press Stop/Exit.

■When you enter your name, see Entering Text, page 106.

■ The telephone number you enter is used only for the Call Back Message and Cover Page features.

■If you do not enter a fax number, no additional information can be entered.

■ To enter a space, press

once between numbers and twice between

characters.

 

■If your Station ID has already been programmed, the screen prompts “1” to make a change, or “2” to exit without changing.

USE BASIC

Setup 13