
Special Recording Modes
• The front and rear tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing).
NOTES
•You can use only one special recording mode at a time.
•The interval and the number of frames recorded cannot be changed while recording.
•Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
•Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the movie format or video configuration.
•During this special recording mode, the time code’s running mode (A90) can be set to [Rec Run] or [Regen.] and the time code advances by the number of frames recorded. If the time code’s running mode is set to [Free Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during special recording mode. When the special recording mode is deactivated, the running mode will return to its previous setting.
• During special recording mode, the time code signal will not be output from the TIME CODE terminal,
119
English
Frame Recording Mode
Set the number of frames in advance. We recommend operating the camcorder remotely or stabilizing the camcorder, for example, on a tripod. Sound is not recorded in this special recording mode.
Operating modes:
Configuring Frame Recording Mode
1 Open the [Recorded Frames] submenu. | [wOther Functions] |
| |
[wOther Functions] >[Frame Recording] >[Recorded Frames] |
|
2 Select the desired number of frames and then press SET. |
| |
• Available options depend on the frame rate used: 1, 3, 6 or 9 (23.98P, | [Recorded Frames] | |
29.97P, 59.94i), or 2, 6 or 12 (59.94P). | ||
|
Activating Frame Recording Mode and Recording
1 Open the [Special Recording] submenu. | [wOther Functions] |
| |
[wOther Functions] >[Special Recording] |
|
2 Select [Frame Recording] and then press SET. |
|
• [FRM STBY] appears at the top of the screen (with [FRM] flashing). | [Off] |
|
3Press the START/STOP button to begin recording.
•The camcorder automatically records the set number of frames.
•The front and rear tally lamps illuminate.
•[FRM STBY] changes to [ÜFRM REC] while recording frames and [ÜFRM STBY] when frames are not being recorded.
•Repeat until you finish recording.
4Open the [Special Recording] submenu.
[wOther Functions] >[Special Recording]
5Select [Off] and then press SET.
•Frame recording mode ends and all of the recorded frames are joined together into one clip.
•The tally lamps go out and [STBY] appears at the top of the screen.