Clip Operations
Adding Shot Marks
You can add shot marks (", #or both) to shots in an MXF clip you want to set apart. Later, you can display an index screen that shows only the clips with a "mark, only the clips with a #mark, or only clips with either shot mark.
Operating modes: 
Adding Shot Marks during Playback
To add an "mark or #mark to a clip during playback or playback pause, you must first set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] in advance.
1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] (A129).
2 During playback or playback pause, press the assignable button at the point in the clip where you want to add the shot mark.
•A message indicating the shot mark appears on the screen and the shot mark is added to the clip.
•Adding a shot mark to a clip during playback will pause the playback.
Adding Shot Marks from the Index Screen
1 Open the [Shot Mark] index screen or [Expand Clip] index screen.
2Select the desired frame (thumbnail) and then press SET to open the clip menu.
3 Select [Add Shot Mark 1] or [Add Shot Mark 2] and then press SET.
•The clip information screen appears and it prompts you to confirm the operation. 4 Select [OK] and then press SET.
•The screen changes back to the previous index screen and the selected shot mark appears next to the selected clip’s thumbnail.
•Select [Cancel] instead to cancel the operation.
NOTES
•You can also add "marks (only) using the SHOT1 button on the supplied wireless controller.
•Up to 100 shot marks ("and #marks combined) can be added to a single MXF clip.
•There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot mark.
157
English
Deleting Shot Marks
Operating modes: 
1 Open the [Shot Mark] index screen or [Expand Clip] index screen.
2Select the desired frame (thumbnail) and then press SET to open the clip menu.
3 Select [Del. Shot Mark 1] or [Del. Shot Mark 2] and then press SET.
•The clip information screen appears and it prompts you to confirm the operation. 4 Select [OK] and then press SET.
•The selected mark is deleted and the screen changes back to the previous index screen.
•If a frame has no shot marks, it will no longer appear in the [Shot Mark] index screen.
•Select [Cancel] instead to cancel the operation.