Browser Remote: Controlling the Camcorder from a Network Device
On the connected network device
1 Start the Web browser on the network device.
2 Enter the camcorder’s URL.
184• Enter the IP address you checked previously into the Web browser’s address bar, adding the prefix “http://”.
•If the you chose a port other than the default port [80], you can specify it by adding “:nnn” at the end of the URL. For example “http://192.168.0.80:095”.
3 Enter the user name and password.
•Be sure to log in with the user name and password of one of the users that were set on the camcorder (A182). If necessary, consult the administrator who configured the camcorder’s settings.
•The Browser Remote screen will appear. The screen displayed will differ depending on the user information used to log in.
•While Browser Remote is correctly connected to the camcorder, the
above the time code will turn on one by one and then turn off in an endless loop.
Camcorder’s IP address from the status screen
Example of the login screen. The screen may differ depending on the Web browser and version used.
•The camcorder’s ID will appear on the Browser Remote screen
while live view is not activated. In the [Metadata Input] screen, it appears at the bottom of the screen.
Screen selection tabs appear only for [Full Control User]
Language selection
Network connection indicator
Camcorder ID
4 Select the language for Browser Remote.
•Press the [Î] next to the language button and select the desired language from the list. Most buttons and controls emulate physical controls on the camcorder and are labeled in English only, regardless of the language selected.
5 Use the Browser Remote controls to operate the camcorder.
•Descriptions of the controls are given in the following pages. Detailed operation is given in each function’s reference page.
6 When you have finished using Browser Remote, on the camcorder set [wOther Functions] >[Network Functions] to [Off] and the press SET.
•The network icons will turn yellow and then disappear from the camcorder’s screen and the connection with the application will be terminated.