Remote Operation of the Camcorder

Using the Optional RC-V100 Remote Controller

You can attach the optional RC-V100 Remote Controller to control the camcorder (including advanced recording functions) from a distance. In addition to turning the camcorder on and off and navigating the menus, while recording you can control various camera functions, such as aperture, shutter and zoom, and custom picture settings, like knee and sharpness.

The connection cable supplied with the RC-V100 is required to connect the RC-V100 to the camcorder's REMOTE terminal.

Connection cable

(supplied with the RC-V100)

45

English

1Turn off the camcorder and connect the optional RC-V100 Remote Controller to the camcorder.

• For details, refer to the instruction manual of the RC-V100.

2Turn on the camcorder in mode and open the [REMOTE Term.] submenu.

[wOther Functions] >[REMOTE Term.]

3 Select [RC-V100] and then press SET.

Options

[RC-V100]: Select this option to use the optional RC-V100 Remote Controller.

[Standard]: Select this option to use commercially available remote controls.

[wOther Functions]

[REMOTE Term.]

[Standard]

NOTES

•The camcorder’s ND filter cannot be changed using the ND button on the remote controller.

•When the camcorder is set to full auto mode (A49), settings related to the aperture, gain, shutter speed and white balance (except for [R Gain] and [B Gain] in the custom picture's [White Balance] settings) cannot be changed using the remote controller.

•Custom picture settings can be changed using the remote controller only when an appropriate custom picture file is selected (A132).