Canon 9592B002, 9593B002 Date, Time and Language Settings

Date, Time and Language Settings

Setting the Date and Time

You will need to set the date and time of the camcorder before you can start using it. When the camcorder’s clock is not set, the [Date/Time] screen will appear automatically with the month selected.

Operating modes:

1Push the joystick up/down to change the month then move (Ð) to the next field.

• To move to the next field you can also press the joystick itself.

2 Change the rest of the fields in the same way.

3 Select (Ð) [Set] and then press the joystick to start the clock and close the screen.

NOTES

•You can change the date format and the clock format (12/24 hours) with the [wOther Functions] > [Set Clock] >[Date Format] setting. You can also change the date and time later on (not during the initial setup) with the [wOther Functions] >[Set Clock] >[Date/Time] setting. However, while the camcorder is being operated through the Browser Remote application, the [Set Clock] submenu is not available.

•When the built-in rechargeable lithium battery is exhausted, the date and time setting may be lost. In such case, recharge the built-in lithium battery (A230) and set the time zone, date and time again.

•Using the optional GP-E2 GPS Receiver, you can have the camcorder adjust settings automatically according to the UTC date/time information received from the GPS signal (A114).

English

Changing the Time Zone

Change the time zone to match the time zone of your location. The default setting is [UTC-05:00 New York]. The time zones are based on Coordinated Universal Time (UTC).

Operating modes: