Selecting a Network Connection

Selecting a Network Connection

You can save up to 5 different network configuration profiles. You can select which one to use depending on where you plan to use the camcorder. If you just saved a new network configuration (A178), that network

180configuration will already be automatically selected and this procedure is not required.

1 Open the [Select] submenu.

[wOther Functions] >[Network Settings] >[Connection Settings]

[wOther Functions]

 

>[Select]

 

 

 

[Network Settings]

2 Select the desired configuration number and then press SET.

 

• The camcorder will connect to the selected network only when you

[Connection Settings]

activate a network function. The icon displayed on the top left of the

 

screen will indicate the type of network selected and the connection

[Select]

status. Refer to the following table.

 

 

 

 

 

 

 

 

 

Connection type

Connection type

Onscreen

Connection status

display

 

 

 

 

 

 

 

 

 

 

Wi-Fi

 

In yellow: The camcorder is connecting to or disconnecting from

 

(Infrastructure)

 

the network. In white: The network function can be used.

 

 

 

 

 

 

Wi-Fi

 

In yellow: Starting the camcorder’s access point. In white: The

 

(Camera Access Point)

 

camcorder’s access point is ready. Connect the Wi-Fi enabled

 

 

 

device to the camcorder.

 

•On the device: Open the Wi-Fi settings screen and select the network name (SSID) that was set in the camcorder. If necessary, enter the password set in the camcorder (A177).

LAN (Ethernet)

In yellow: The camcorder is connecting to or disconnecting from

 

the network. The LAN access indicator will flash as well.

 

In white: The network function can be used. The LAN access

 

indicator will illuminate as well.

•If you set [w ther Functions] >[LAN (Ethernet) LED] to [Off], the LAN access indicator will not illuminate.