Canon 9592B002, 9593B002 manual 192

FTP File Transfer

Transferring Multiple Clips or Photos

1		Connect the camcorder to the desired network (A180).		[wOther Functions]
		• With Camera Access Point connections, you need to actively		[Clips]
192			connect the Wi-Fi enabled device to the camcorder.
				[Photos]
	2	Open the index screen that contains the clips or photos you want
		to transfer (A146).		[FTP Transfer]
3		Open the [FTP Transfer] submenu.
		[wOther Functions] >[Clips] or [Photos] >[FTP Transfer]
4		Select [Select] to select which clips/photos to transfer, or [All] to transfer all the clips/photos and
		then press SET.
		• If you selected [Select], use the joystick to move between the clips/photos. Press SET to select a clip/photo
			to transfer and repeat as necessary. After selecting all the desired clips/photos, press the MENU button.
5		Select [OK] and then press SET.
		•	will appear on the top of the screen, next to the connection type icon. When the icons turn white, all the
			applicable clips/photos will be transferred to the FTP server. When using a LAN connection, the LAN access
			indicator will flash quickly while the files are being transferred.
		• Select [Cancel] instead to cancel the operation.
		• While the clips/photos are transferred, you can press SET to cancel.
		• When the transfer is completed, the network icons will turn yellow and then disappear from the screen.
6		When the confirmation message appears, press SET.

IMPORTANT

•Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and incomplete files may remain at the transfer destination.

-Do not open the CF card slot cover or SD card slot cover.

-Do not disconnect the power source or turn off the camcorder.

•If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete before deleting them.

NOTES

• Depending on the access point’s settings and capabilities, it may take some time to transfer files.