Custom Picture Settings

[Color Matrix]

Color matrix affects the color tones throughout the whole image.

[Select]:

Available options are [Normal 1] to [Normal 4], [Cine 1] and [Cine 2] and [Wide DR]. Generally,

 

this should be the same setting as [Gamma]. After selecting an option, you can make more

 

precise adjustments. (Default: [Normal 1])

[Gain]:

Adjusts the color intensity. This setting can be adjusted from -50 to 50. (Default: ±0)

[Phase]:

Adjusts the color phase. This setting can be adjusted from -18 to 18. (Default: ±0)

[R-G]:

The R-G matrix changes the tint of the picture along the cyan/green and red/magenta

 

gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[R-B]:

The R-B matrix changes the tint of the picture along the cyan/blue and red/yellow gradations.

 

This setting can be adjusted from -50 to 50. (Default: ±0)

[G-R]:

The G-R matrix changes the tint of the picture along the magenta/red and green/cyan

 

gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[G-B]:

The G-B matrix changes the tint of the picture along the magenta/blue and green/yellow

 

gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[B-R]:

The B-R matrix changes the tint of the picture along the yellow/red and blue/cyan gradations.

 

This setting can be adjusted from -50 to 50. (Default: ±0)

[B-G]:

The B-G matrix changes the tint of the picture along the yellow/green and blue/magenta

 

gradations. This setting can be adjusted from -50 to 50. (Default: ±0)

[White Balance]

Adjusts the amount of white balance throughout the whole image.

[R Gain]:

Adjust the intensity of red tones. This setting can be adjusted from -50 to 50. (Default: ±0)

[B Gain]:

Adjust the intensity of blue tones. This setting can be adjusted from -50 to 50. (Default: ±0)

[Color Correction]

The camcorder detects the characteristics of a certain color (color phase, chroma, area and Y level) and corrects them when recording. You can set the color correction for up to two different areas (A and B).

[Select Area]: Selects the area or areas to correct. Available options are [Area A], [Area B] and [Area A&B]. Select [Off] to turn this setting off. (Default: [Off])

[Area A Setting]: Determines the area in which colors will be corrected.

[Phase]: Adjusts the color phase for area A. This setting can be adjusted from 0 to 31. (Default: 0)

[Chroma]: Adjusts the color saturation for area A. This setting can be adjusted from 0 to 31. (Default: 16)

[Area]: Adjusts the color range for area A. This setting can be adjusted from 0 to 31. (Default: 16)

[Y Level]: Adjusts the brightness for area A. This setting can be adjusted from 0 to 31. (Default: 16)

[Area A Revision]: Sets the amount of correction for area A.

[Level]: Adjusts the amount of correction to the color saturation. This setting can be adjusted from -50 to 50. (Default: ±0)

[Phase]: Adjusts the amount of correction to the color phase. This setting can be adjusted from -18 to 18. (Default: ±0)

[Area B Setting]: Determines the area in which colors will be corrected.

[Phase]: Adjusts the color phase for area B. This setting can be adjusted from 0 to 31. (Default: 0)

[Chroma]: Adjusts the color saturation for area B. This setting can be adjusted from 0 to 31. (Default: 16)

[Area]: Adjusts the color range for area B. This setting can be adjusted from 0 to 31. (Default: 16)

[Y Level]: Adjusts the brightness for area B. This setting can be adjusted from 0 to 31. (Default: 16)

[Area B Revision]: Sets the amount of correction for area B.

[Level]: Adjusts the amount of correction to the color saturation. This setting can be adjusted from -50 to 50. (Default: ±0)

[Phase]: Adjusts the amount of correction to the color phase. This setting can be adjusted from -18 to 18. (Default: ±0)

139

English