Custom Picture Settings

Gamma

 

 

 

 

Normal 1

 

 

 

 

 

 

Normal 2/3/4

 

Cine 1

136

 

 

Cine 2

 

 

 

 

 

 

 

 

 

Output

 

 

 

Output

 

 

 

 

 

 

 

Normal 4

 

 

 

Normal 3

 

 

 

Normal 1/2

 

 

 

 

 

 

Normal 1 Wide DR

Input

Input

[Black]

Controls the black level and color cast of blacks.

[Master Pedestal]: The master pedestal increases or decreases the black level. Higher settings will make dark areas brighter but decrease contrast. This setting can be adjusted from -50 to 50. (Default: ±0)

[Master Black]: Corrects color cast in blacks.

[Red]: -50 to 50 (Default: ±0)

[Green]: -50 to 50 (Default: ±0)

[Blue]: -50 to 50 (Default: ±0)

[Black Gamma]

Controls the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to [Wide DR], this setting has no effect on the picture.

[Level]:

Raises or lowers the lower part of the gamma curve. This setting can be adjusted from -50 to

 

50. (Default: ±0)

[Range]:

Selects the range in which dark areas are affected. This setting can be adjusted from -20 to 50.

 

(Default: ±0)

[Point]:

Determines the shape of the lower part of the gamma curve. This setting can be adjusted from -

 

20 to 50. (Default: ±0)

 

Black Gamma

Output

Point

Input

[Low Key Satur.]

Adjusts color saturation in dark areas.

[Enable]:

Activates/deactivates the setting. (Default: [Off])

[Level]:

Specifies how saturated colors are in dark areas. This setting can be adjusted from -50 to 50.

 

(Default: ±0)