
Using Optional Conversion Lenses
Using Optional Conversion Lenses
You can use the following optional conversion lenses with this camcorder. Before you attach a conversion lens, perform the procedure below to optimize the autofocus and minimum object distance for the particular
80accessory.
Operating modes:
Optional Conversion Lens | Focal Length Factor | Minimum Focusing Distance |
| |
Approx. 1.5x | Approx. 130 cm (4.3 ft.) throughout the zoom range |
| ||
|
|
|
|
|
Approx. 0.75x | Approx. 60 cm (2.0 ft.) throughout the zoom range |
| ||
|
|
|
|
|
|
|
|
|
|
1 Open the [Conversion Lens] submenu.
[~Camera Setup] >[Conversion Lens]
2Select
•The image stabilization method, minimum focusing distance and the approximate distance to the subject displayed on the screen will change depending on the conversion lens selected.
•Select [Off] if you do not intend to use a conversion lens.
[~Camera Setup]
[Conversion Lens]
[Off]
NOTES
•Even if [~Camera Setup] >[AF Mode] >[Speed] was set to [High] or [Medium], it will change automatically to [Normal] when using a conversion lens.
•Vignetting may occur when taking wide angle shots with the optional
•When [Conversion Lens] is set to
•If you set an assignable button to