Gain
Setting the Gain Limit (AGC Limit)
For each gain position, you can activate the gain limit to prevent the camcorder from setting a level higher than a preset limit between 0 dB and 27 dB. When you set the camcorder to full auto mode (A49) or infrared mode (A126), [AGC Limit] will be set to [Off/27 dB].
1 Open the [AGC Limit] submenu.
[~Camera Setup] >[Gain] >[L], [M] or [H] >[AGC Limit] | [~Camera Setup] |
| |
2 Select the desired level and then press SET. | [Gain] |
| |
| [L], [M] or [H] |
| [AGC Limit] |
| [Off/27 dB] |
|
|
Manual Gain
Using the Joystick
1 Change the gain mode to manual using the direct setting mode.
•Press SET and push the joystick left/right until the gain mode icon is highlighted in orange, select the 
icon and press SET. For details refer to Using the Direct Setting Mode (A57).
•The current position of the GAIN switch will be set to manual gain.
2 Adjust the gain value using the direct setting mode.
•Press SET and push the joystick left/right until the gain value is highlighted in orange, select the desired value and then press SET. For details refer to Using the Direct Setting Mode (A57).
NOTES
•You can also select the gain value from the respective [Manual] setting ([~Camera Setup] >[Gain] >[L], [M] or [H] >[Manual]). Using the menu, you can also select [Fine Tuning] and then select a gain level between
Remote Operation Using Browser Remote
After completing the necessary preparations (A182), you can adjust the gain value of the currently selected gain position remotely from a connected device using the Browser Remote application.
1 Press the gain mode button on the Browser Remote screen and then select [Manual]. 2 Press the current gain value and select the desired value from the list.
•You may need to scroll up/down to see all the available values.
•The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
63
English