Custom Picture Settings

 

[Other Functions]

 

[Setup Level]: Adjusts the black level set by the [Black] and [Master Pedestal] settings. This setting can be

 

adjusted from -50 to 50. (Default: ±0)

140

[Over 100%]: This function determines how the camcorder handles video signals exceeding 100%. Available

 

options are [Through] to do nothing, [Clip] to clip the signal at 100%, and [Press] that

compresses a signal of up to 108% down to 100% levels. (Default: [Through])

NOTES

•When an optional RC-V100 Remote Controller is connected to the camcorder, the following custom picture settings can be changed using the buttons and dials on the remote controller. They cannot be changed from the camcorder while the RC-V100 is connected.

-[Black] >[Master Pedestal]; [Black] >[Master Black] >[Red], [Blue]

-[Black Gamma] >[Level]

-[Knee] >[Slope] and [Point] (only when [Knee] >[Enable] is set to [On])

-[Sharpness] >[Level]

-[White Balance] >[R Gain], [B Gain]