Connecting to a
4 Within 2 minutes, press SET on the camcorder.
•While [Connecting] appears on the screen, you can press SET or the CANCEL button to cancel the operation.
•After the connection is correctly established, continue with the procedure to configure the IP address assignment (A178).
NOTES
•The [WPS: Button] method may not work correctly if there are several active access points in the area. In such
case try using [WPS: PIN Code] or [Search for Access Points] (A175) instead.
WPS using a PIN code
1 Open the [Set Up New] submenu.
[wOther Functions] >[Network Settings] >[Connection Settings] >[Set Up New]
2 Select the [WPS: PIN Code] method.
• The camcorder will generate and display an
3 Enter the PIN code from step 2 into the wireless router’s WPS (PIN code) setup screen.
•For most wireless routers, you must use a Web browser to access the setup screen.
•For details about how to access your wireless router’s settings and activate the
4 Within 2 minutes, press SET on the camcorder.
•While [Connecting] appears on the screen, you can press SET or the CANCEL button to cancel the operation.
•After the connection is correctly established, continue with the procedure to configure the IP address assignment (A178).
175
English
Searching for Access Points
The camcorder will automatically detect access points in the vicinity. After you select the desired access point, you only need to enter the selected network’s encryption key (password) to connect the camcorder.
1 Open the [Set Up New] submenu.
[wOther Functions] >[Network Settings] >[Connection Settings]
>[Set Up New]
2 Select the [Search for Access Points] method.
•The camcorder will search for active access points in your area and display a list of available options.
[wOther Functions]
[Network Settings]
[Connection Settings]
[Set Up New]