
Connecting to a
Connecting to a Wi-Fi Network
The camcorder is
174 wireless routers (access points) compliant with the 802.11a/b/g/n protocol and are
The camcorder offers 5 ways to connect to a
Operating modes:
WPS (button): If your wireless router supports
WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS using a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless router’s WPS function. For details refer to the instruction manual of your wireless router.
Searching for Access Points: If your access point does not support the WPS function or you cannot activate it, you can have the camcorder search for access points in the area.
Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automatically detected by the camcorder, you can enter all the necessary settings manually. This requires more advanced knowledge of
Camera Access Point: When shooting in a location where there are no access points available, the camcorder can serve as a wireless access point*.
*Limited only to the connection between the camcorder and supported
Wireless Routers with a WPS Button
1 Open the [Set Up New] submenu.
[wOther Functions] >[Network Settings] >[Connection Settings]
>[Set Up New]
2 Select the [WPS: Button] method.
3 Press and hold the WPS button on the wireless router.
•The length of time required to hold down the WPS button depends on the wireless router. Refer to the instruction manual of your wireless router and make sure the wireless router’s WPS function is activated.
[wOther Functions]
[Network Settings]
[Connection Settings]
[Set Up New]