
Shutter Speed
Manual Shutter
When the shutter speed mode is set to manual, you can select to adjust the shutter as a shutter speed, angle value, clear scan frequency or slow shutter speed according to your shooting needs.
60
Changing the Shutter Speed Mode and Value
1 Set the SHUTTER switch to ON.
2 Open the shutter [Manual] submenu.
[~Camera Setup] >[Shutter] >[Manual]
3 Select the desired mode and then press SET.
• If you selected [Speed] (the default value), you can select the increment scale to use when adjusting the shutter speed; otherwise, skip to step 6.
4 Open the [Shutter Increment] submenu.
[~Camera Setup] >[Shutter] >[Shutter Increment]
5 Select [Normal] or [Fine] and then press SET.
•If you select [Fine], you can adjust the shutter speed in increments of up to 1/256 step.
6 Close the menu and change the shutter speed mode to manual using the direct setting mode.
•Press SET and push the joystick left/right until the shutter speed mode
icon is highlighted in orange, select the icon and press SET. For details refer to Using the Direct Setting Mode (A57).
[~Camera Setup]
[Shutter]
7 Adjust the shutter speed, angle value or clear scan frequency using the direct setting mode.
•Press SET and push the joystick left/right until the shutter value is highlighted in orange, select the desired value and then press SET. For details refer to Using the Direct Setting Mode (A57).
•If in step 3 you selected [Clear Scan], adjust the frequency so that black bands do not appear on the screen.
[Manual]
[Speed]
[~Camera Setup]
NOTES
•If you set an assignable button to [Shutter Increment] (A129), you can press the button to change the shutter increment (steps
Remote Operation Using Browser Remote
[Shutter]
[Shutter Increment]
[Normal]
After completing the necessary preparations (A182), you can adjust the shutter speed remotely from a connected device using the Browser Remote application.
1 Press the shutter speed mode button on the Browser Remote screen.
2 Select the desired mode.
3 Press the current shutter speed, angle value or clear scan frequency and select the desired value from the list.
•You may need to scroll up/down to see all the available values.
•The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.