Browser Remote: Controlling the Camcorder from a Network Device
1 Open the [Users Settings] submenu.
[wOther Functions] >[Network Settings] >[Remote Settings] > [Users Settings]
2To enter the [User Name] for the [Full Control User], select [Input] and then press SET.
• Enter the desired user name using the keyboard screen (A176).
3 Enter the [Password] for the [Full Control User] in the same way.
4Repeat steps 2 and 3 to enter the user names and passwords for the [Camera Control User] and [Meta Control User].
5 Select [OK] and then press SET to save the network configuration. When the confirmation screen appears, press SET.
[wOther Functions]
[Network Settings]
[Remote Settings]
[Users Settings]
183
English
6 Back in the [Remote Settings] submenu, select [Select User] and then press SET.
7 Select [One User (Full Control)] or [Two Users (Camera/Meta)] and then press SET.
8 Select [OK] and then press SET to save the network configuration. When the confirmation screen appears, press SET.
Starting Browser Remote
After connecting the camcorder to the network, you can start the Browser Remote application on the Web browser* of any network device connected to the same network. ou can check the Browser Remote settings on the status screens (A216).
* A Web browser that supports JavaScript and is enabled to accept cookies is required.
Preparations on the camcorder
Operating modes: 
1 Connect the camcorder to the desired network (A180).
•Select a Camera Access Point connection or a wired network connection.
2 To activate Browser Remote on the camcorder, open the [Network Functions] submenu.
[wOther Functions] >[Network Functions]
3 Select [Browser Remote] and then press SET.
[wOther Functions]
[Network Functions]
[Off]
•
will appear on the top of the screen, next to the connection type icon. When the icons turn white, the camcorder is ready to accept commands from the Browser Remote application.
•With Camera Access Point connections, you need to actively connect the
4 Check the camcorder’s IP address on the status screen.
•Set an assignable button to [Status] in advance (A 129). Press the assignable button to open the status screens and push the joystick up/down to select the [Network Settings 4/10] status screen.
•Check the IP address assigned to the camcorder ([IP Address]) and, if necessary, write it down.
•Press the assignable button set to [Status] again to close the status screens