Connecting to an External Monitor

Using the 3G/HD-SDI Terminal

The digital signal output from the 3G/HD-SDI terminal includes the video signal, audio signal (2 or 4 channels) and time code signal. If necessary, perform the following procedure to activate the terminal and select the type of signal output. Turning the output off will conserve the camcorder’s power.

1Open the [3G/HD-SDI] submenu. [¢Video Setup] >[3G/HD-SDI]

2 Select the desired option and then press SET.

3 To select the mapping mode for 1080/59.94P output, open the [3G-SDI Mapping] submenu.

[¢Video Setup] >[3G-SDI Mapping]

4 Select the desired option and then press SET.

•You can select a video output signal compliant with Level A or Level B of the SMPTE ST 425-1 standard.

Options

[Direct]1:The video recording signal is output unchanged.

[Compatible]1: The video signal output is compatible with most external monitors. [On]2:There is video output from the terminal.

[Off]:No video output from the terminal.

1 mode only. 2 mode only.

[¢Video Setup]

[3G/HD-SDI]

163

[Off]

English

[¢Video Setup]

[3G-SDI Mapping]

[Level B]

NOTES

•If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A165).

Using the MON. Terminal

The digital signal output from the MON. terminal also includes the video signal, audio signal (2 or 4 channels) and time code signal. If necessary, perform the following procedure to activate the terminal and change the output to HD or SD. Turning the output off will conserve the camcorder's power.

1 Open the [MON.] submenu.

[¢Video Setup] >[MON.]

2 Select the desired option and then press SET.

•If you selected [SD], you can select the SD output method (A165).

NOTES

[¢Video Setup]

[MON.]

[Off]

•If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A165).