Preparing the Camcorder

Setting the Screen to Black & White

The viewfinder and OLED screen display in color by default but you can set them to black & white. Even when the screen is black & white,

[£OLED/VF Setup]

onscreen text and icons will still be displayed in color.

1Open the [OLED/VF B&W] submenu.

[£OLED/VF Setup] >[OLED/VF B&W]

2 Select [On] and then press SET.

[OLED/VF B&W]

[Off]

35

English

NOTES

If you set an assignable button to [OLED/VF B&W] (A129), you can press the button to turn the black & white display on and off.

Adjusting the Grip Unit

The grip unit can be rotated 120º (at 15º intervals) to give

you a convenient grip angle for high- and low-angle￿

shooting.

￿

1 Push the grip’s UNLOCK lever forward (toward the START/STOP button on the grip). While holding it pressed down, rotate the grip unit to the desired angle.

2 At about the desired angle, release the UNL CK lever and rotate the grip unit further until it clicks in place.

Adjusting the Grip Belt

Adjust the grip belt so that you can reach the grip zoom rocker with your index and middle fingers, and the START/STOP button with your thumb.

IMPORTANT

• Be careful not to drop the camcorder when adjusting the grip belt.