
Menu Options
[Reset]: Reset various camcorder settings.
[All Settings]: Resets all the camcorder’s settings to default settings, except for the hour meter.
[Camera Settings] ( mode only): Resets the white balance, iris, gain, shutter speed,
208[~Camera Setup] settings and custom picture settings to default settings. [Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp] ( mode only): Allows you to set whether the front and rear tally lamps illuminate while the camcorder is recording.
[POWER LED]: Allows you to set whether the power indicator illuminates while the camcorder is on.
[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator illuminate while the camcorder is accessing a CF card or SD card.
[LAN (Ethernet) LED]: Allows you to set whether the LAN access indicator illuminates when the camcorder is accessing a network via the LAN cable.
[Genlock Adjustment] ( mode only): The phase difference between the external Genlock signal and the camcorder is initially set to 0. This function allows you to adjust it within the range of approx. ±0.4 H
[MXF] >[Clips] settings ( mode only)
[Title Prefix]: Determines the first 2 characters of the clip name. Combined with the [Number Setting] setting, this constitutes the
[Number Setting]: Determines the last 4 digits of the clip name. Combined with the [Title Prefix] setting, this constitutes the
[MXF] >[Set Metadata] settings ( mode only)
[Country Code]: This identifier is the country code defined by
[Organization]: This identifier represents the organization that owns or operates the camcorder and can be obtained by registering with the SMPTE Registration Authority. If the organization is not registered, enter [0000].
[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].
[Delete Last Clip]: ( mode only): Deletes the last clip you recorded. This setting option will not appear if you turned the camcorder off since recording the last clip.
[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and the second keeps track of operation time since the last time the second hour meter was reset with this function.
[Certification Logos] ( mode only): This setting displays certification logos that apply to this camcorder.
[Firmware] ( mode only): You can verify the current version of the camcorder’s firmware. This menu option is usually unavailable.
[¥My Menu] ( | mode only) |
|
| |
|
|
|
|
|
Menu item |
| Submenu | Setting options | A |
[Edit] |
| [Register] | [Cancel], [OK] | |
|
|
|
|
|
|
| [Move] | [Cancel], [OK] |
|
|
|
|
|
|
|
| [Delete] | [Cancel], [OK] |
|
|
|
|
|
|
|
| [Reset All] | [Cancel], [OK] |
|
|
|
|
|
|