Playback

Available playback types

Playback type

Operation

 

 

Fast playback

Buttons: Press the Øor ×button.

Joystick: During playback, push the joystick up or down.

Wireless controller: Press the Øor ×button.

149

Frame advance/reverse

Repeat to increase the playback speed to approximately 5x J 15x J 60x the normal speed.

Joystick: During playback pause, push the joystick up or down.

Wireless controller: Press the Ôor Óbutton (during playback pause).

English

Skip to the beginning of the

Buttons: Press the Ùbutton.

next clip

Joystick: Push the joystick right.

Wireless controller: Press the ßbutton.

Skip to the beginning of the

Buttons: Press the Úbutton.

current clip

Joystick: Push the joystick left.

Wireless controller: Press the àbutton.

Buttons: Press the Úbutton twice.

Skip to the previous clip Joystick: Push the joystick left twice.

Wireless controller: Press the àbutton twice.

Buttons: Press the Òbutton.

Return to playback mode Joystick: Press the joystick itself (SET button).

Wireless controller: Press the Òbutton.

NOTES

There is no audio during any of the playback types listed in the previous table.

During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.

The speed indicated on the screen is approximate.

During frame advance, the time advanced between frames depends on the video configuration used: 0.2 seconds (for 1280x720/59.94P MXF clips) or 0.5 seconds for other video configurations.

You can press the DISP. button to turn the joystick guide display on and off.

Adjusting the Volume

×(headphone) terminal

Speaker

During playback, audio will be output from the monaural built-in speaker (on the grip) or from the stereo × (headphone) terminal. When you connect headphones to the ×(headphone) terminal, the built-in speaker will be muted. The audio signal will also be output through the 3G/HD-SDI terminal*, MON. terminal*, HDMI OUT terminal and AV OUT terminal.

* only.

Press the HEADPHONE +/- buttons to adjust the volume.

NOTES

• For details on changing the audio channel, refer to Selecting the Audio Channel (A166).

• You can also adjust the headphone or built-in speaker volume with the [¡Audio Setup] >[Audio Output] > [Headphone Volume] or [Speaker Volume] setting.