Custom Picture Settings

-Adjusting custom picture related settings using the remote controller will change the settings registered under the currently selected custom picture file. If you want to keep an important custom picture file, copy it in advance to the SD card or select in advance a custom picture file you do not mind changing.

133

Editing a Custom Picture File’s Settings

1After selecting a file, select [,/Edit File] and then press SET.

2 Select a setting and then press SET.

3 Change the setting to the desired level and then press SET.

•Refer to the table Available Custom Picture Settings (A135) for details on the various settings.

•Repeat steps 2 and 3 for other settings, as necessary.

4 Press the MENU button to exit the menu.

•The new custom picture settings will be applied. /(camcorder) or .(SD card) and the custom picture file’s number will appear on the left of the screen.

Resetting the current file’s settings to default values

1 Select [Reset] and then press SET.

2Select the default values and then press SET.

•Select [Normal] to reset to neutral default values (equivalent to not using custom picture settings at all) or [Wide DR] if you want to replicate the preset settings, for example as a starting point to edit them further.

3 Select [OK] and then press SET.

English

Renaming Custom Picture Files

1 After selecting a file, open the [Rename] submenu. [,/Edit File] >[Rename]

•A screen appears that displays the current file name with an orange selection frame on the first character.

[,/Edit File]

[Rename]

2Push the joystick up/down to select an alphanumeric character or symbol then push it right to move to the next field.

• Change the rest of the name in the same way.

3 Select [Set] and then press SET.

4 Press the MENU button to exit the menu.

Protecting Custom Picture Files

[,/Edit File]

Protecting a custom picture file prevents its settings from being accidentally changed.

[Protect]

1 After selecting a file, open the [Protect] submenu. [,/Edit File] >[Protect]

2 Select [Protect] and then press SET.

•In the custom picture menu, iwill appear next to the file name.

•To remove protection settings, select [Unprotect] instead.